You are not logged in.

#1 2022-06-21 22:35:25

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 84

Cradle for V800

The V800 has of course the same hull as the F26 and V26 and I would be interested in a used cradle should anyone have one.  I am based in Weymouth.  Thanks.


VICTORIA 800 Dulcibella

Offline

#2 2022-08-07 12:25:40

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 84

Re: Cradle for V800

With no response regarding a secondhand cradle I am looking at alternatives.  Can anyone advise on their use of a Jacobs, Tennamast Yacht leg and cradle company or indeed any other supplier?


VICTORIA 800 Dulcibella

Offline

#3 2022-08-07 13:46:19

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 84

Re: Cradle for V800

Further to above can anyone provide me with measurement details for a cradle.  It appears that the ideal pad positions are at the lifting points which are about 3.2 M apart lengthwise and I think the bow pads need to be about 1.6 M apart and the stern 1.4 M widthwise.  Pad heights look to be 1.3 M bow and 1.45 stern.

Any confirmation or variation gratefully received.


VICTORIA 800 Dulcibella

Offline

#4 2022-08-16 15:31:15

Murray_Fraser
Member
From: Weymouth
Registered: 2016-11-22
Posts: 84

Re: Cradle for V800

Cradle issue now resolved.


VICTORIA 800 Dulcibella

Offline

Board footer

Powered by FluxBB